KAI180Mk2 | Fully balanced integrated amplifier. 2x180W (8 Ohm) in class A + remote |
KAS180Mk2 | Fully balanced dual mono power amplifier. 2x180W (8 Ohm) in class A |
KAS400 | Fully balanced dual mono power amplifier. 2x400W (8 Ohm) in class A |
KAS600 | Fully balanced dual mono power amplifier. 2x600W (8 Ohm) in class A |
KAM900 | Fully balanced mono power amplifier. 2x900W (8 Ohm) in class A |
KAM2000 | Fully balanced mono power amplifier. 2x2000W (8 Ohm) in class A |
KA Ph1 | Fully balanced phono preamplifier |
KAL Mk3 | Fully balanced line preamplifier in class A with remote |
KAL Reference Mk3 | Fully balanced reference preamplifier in class A with external powersupply + remote |
KA Ph Reference | Dual mono phono preamplifier with external supply |
Master LINEa | Fully Balanced Line Preamplifier in Class A with external power supply with 4 gang attenuator and remote 4-xlr + 2-rca inputs / 2-xlr outputs |
Master LINEb | Fully Balanced Line Preamplifier in class A in one chassis with 4 gang balanced attenuator and remote, 4-xlr + 2-rca inputs / 2-xlr outputs |
Master PHONOa | Fully Balanced Phono Preamplifier in class A with external power supply (3 inputs-xlr/rca, 5 eq curves, output phase selecting, xlr/rca output |
Master PHONOb | Fully Balanced Phono Preamplifier in class A, one chassis, (1 input-xlr/rca, 5eq curves, output phase selecting, xlr/rca output) |
Master POWERa | Fully Balanced dual mono (stereo) Power Amplifier, 2 x 650/1200/1920W at 8/4/2 Ohm in active class A |
Master POWERb | Fully Balanced dual mono (stereo) Power Amplifier 2 x 450/810/1350W at 8/4/2 Ohm in active class A – available from 03/2022 |
Master POWERa mono | Fully Balanced mono Power Amplifier, 2 x 2100/3900/6600W at 8/4/2 Ohm in active class A |
Master POWERb mono | Fully Balanced mono Power Amplifier, 2 x 1200/2100/3900W at 8/4/2 Ohm in active class A – available from 03/2022 |

Master POWERa MONO
INPUTS: 1 balanced (XLR) and 1 unbalanced (RCA)
INPUT IMPEDANCE: 30 kOhm (balanced/unbalanced) 1.25
INPUT SENSITIVITY: V/RMS (for max output) + 36dB
GAIN:
XLR PIN LAYOUT: PIN 1-ground, PIN 2-positive signal, PIN 3-negative signal (when use RCA input you need to insert XLR shorting plug!)
POWER OUTPUT: 2.100/3.600/6.000W at 8/4/2ohm (peak power output: 2.400W at 8ohm)
FREQUENCY RESPONSE: 20 Hz to 20 kHz, +/-0 dB; (DC to 300kHz, -3 dB)
DISTORTION: THD 0.03%
IMD 0.03%
SPEED: Rise and Settling time < 450 ns Slew rate 1.500 V/us (Amplification stages)
SIGNAL TO NOISE RATIO: > 120 dB (unweighted)
POWER SUPPLY: 2pcs of 2.700VA low noise toroidal transformers, 210.000uF custom made capacitors bank
AC VOLTAGE: 115 V or 230 V (nominal line voltage)
AC VOLTAGE RANGE: +/- 10% (from nominal line voltage)
WARRANTY: 5 years, parts and labor
NET DIMENSIONS: 504 x 292 x 603mm (whd); 19.8 x 11.5 x 23.7 inch (whd) NETWEIGHT: 105kg / 231lbs (each)
PACKAGE DIMENSIONS: 720 x 410 x 820mm (whd); 28.3 x 16.1 x 32.3 inch (whd)
PACKAGEWEIGHT: 130kg / 286lbs (each)

Fully Balanced dual mono (stereo) Power Amplifier, 2 x 750/1.500/2.400W at 8/4/2 Ohm in active class A
INPUTS: 2 balanced (XLR) and 2 unbalanced
INPUT IMPEDANCE: (RCA) 30 kOhm (balanced/unbalanced)
INPUT SENSITIVITY: 1.25 V/RMS (for max output) + 30dB
GAIN:
XLR PIN LAYOUT: PIN 1-ground, PIN 2-positive signal, PIN 3-negative signal (when use RCA input you need to insert XLR shorting plug!)
POWER OUTPUT: 2 x 650/2 x 1.100/2 x 1.800W at 8/4/2ohm (peak power output: 800W at 8ohm)
FREQUENCY RESPONSE: 20 Hz to 20 kHz, +/-0 dB; (DC to 300kHz, -3 dB)
DISTORTION: THD 0.03%
IMD 0.03%
SPEED: Rise and Settling time < 450 ns
Slew rate 1.500 V/us (Amplification stages)
SIGNAL TO NOISE RATIO: > 120 dB (unweighted)
POWER SUPPLY: 2pcs of 2.100VA low noise toroidal transformers, 210.000uF custom made capacitors bank
AC VOLTAGE: 115 V or 230 V (nominal line voltage)
AC VOLTAGE RANGE: +/- 10% (from nominal line voltage)
WARRANTY: 5 years, parts and labor
NET DIMENSIONS: 504 x 292 x 603mm (whd); 19.8 x 11.5 x 23.7 inch (whd)
NET WEIGHT: 105kg / 231lbs
PACKAGE DIMENSIONS: 720 x 410 x 820mm (whd); 28.3 x 16.1 x 32.3 inch (whd)
PACKAGE WEIGHT: 130kg / 286lbs

*LINE INPUTS: 4 balanced (XLR)and 2 unbalanced (RCA)
*LINE OUTPUTS: 2 balanced (XLR)
*INPUT IMPEDANCE: 30 kOhm (balanced/unbalanced)
*OUTPUT IMPEDANCE: 90 Ohm
*OUTPUT LEVEL: 1.55 V/RMS (nominal)
18.0 V/RMS (maximum / balanced / 600 Ohm load)
*MAX. INPUT LEVEL: 5.4 V/RMS (balanced/unbalanced / Gain set to 6 dB)
(before saturation) 3.6 V/RMS (balanced/unbalanced / Gain set to 9 dB)
*GAIN: + 6 dB or +9 dB (adjustable)
*FREQUENCY RESPONSE: 20 Hz to 20 kHz, +/-0 dB; (1.5 Hz to 3 MHz, -3 dB)
*DISTORTION: THD 0.003% (Full output, 20Hz to 20kHz)
IMD 0.003% (Full output)
*SPEED: Rise and Settling time < 450 ns Slew rate 1.500 V/us (Amplification stages) *SIGNAL TO NOISE RATIO: > 120 dB (unweighted)
*AC VOLTAGE: 115 V or 230 V (nominal line voltage)
*AC VOLTAGE RANGE: +/- 10% (from nominal line voltage)
*POWER CONSUMPTION: 60 W (maximum)
*WARRANTY: 5 years, parts and labor
*NET DIMENSIONS: 504 x 126 x 390 mm (whd); 19.8 x 5.1 x 15.3 inch (whd)
(Main control unit and Power supply unit)
*NET WEIGHT: 16.2 kg / 35.4 lbs – (Main control unit)
17.1 kg / 37.5 lbs – (Power supply unit)
*PACKAGE DIMENSIONS: 645 x 255 x 516 mm (whd); 25.5 x 10.2 x 20.4 inch (whd)
(Main control unit and Power supply unit)
*PACKAGE WEIGHT: 26.1 kg / 57.6 lbs – (Main control unit)
27.0 kg / 59.4 lbs – (Power supply unit)

LINEb
DUAL MONO BALANCED LINE PREAMPLIFIER
LINE INPUTS: 4 balanced ( XLR ) and 2 unbalanced ( RCA )
LINE OUTPUTS: 2 balanced ( XLR )
INPUT IMPEDANCE: 30 kOhm ( balanced/unbalanced )
OUTPUT IMPEDANCE: 90 Ohm
OUTPUT LEVEL: 1.55 V/RMS ( nominal )
18.0 V/RMS ( maximum / balanced / 600 Ohm load )
MAX. INPUT LEVEL: 5.4 V/RMS ( balanced/unbalanced / ) Gain set to 6 dB
(before saturation) 3.6 V/RMS ( balanced/unbalanced / ) Gain set to 9 dB
GAIN: + 6 dB or +9 dB ( adjustable )
FREQUENCY RESPONSE: 20 Hz to 20 kHz, +/-0 dB; ( 1.5 Hz to 3MHz, -3 dB )
DISTORTION: THD 0.003% ( Full output, 20Hz to 20kHz )
IMD 0.003% ( Full output )
SPEED: Rise and Settling time < 450 ns , Slew rate 1.500 V/us (Amplification stages)
SIGNAL TO NOISE RATIO: > 120 dB ( unweighted )
AC VOLTAGE: 115 V or 230 V ( nominal line voltage )
AC VOLTAGE RANGE: +/- 10% ( from nominal line voltage )
POWER CONSUMPTION: 60W ( maximum )
WARRANTY: 5 years, parts and labor
NET DIMENSIONS: 504 x 126 x 390 mm ( whd ); 19.8 x 5.1 x 15.3 inches ( whd )
( Main control unit )
NETWEIGHT: 17.4 kg / 38.4 lbs – ( Main control unit )
PACKAGE DIMENSIONS: 645 x 255 x 516mm ( whd ); 25.5 x 10.2 x 20.4 inches (whd)
(Main control unit)
PACKAGEWEIGHT: 27.6 kg / 60.6 lbs – (Main control unit)

POWERb – Dual mono (stereo) power amplifier
Technical specifications
The following data were consistently measured on random test objects and are typical of the product in question. Nominal operating mains (AC) voltage of all our products is 115V or 230V . If the mains supply voltage drops approximately 10% below its nominal value, the power output of our amplifiers will reduce itself by approximately 15%.
INPUTS: 2 balanced (XLR) and 2 unbalanced (RCA)
INPUT IMPEDANCE: 30 kOhm (balanced/unbalanced)
INPUT SENSITIVITY: 2.0 V/RMS (for max output)
GAIN: + 30dB
XLR PIN LAYOUT: PIN 1-ground, PIN 2-positive signal, PIN 3-negative signal
(when use RCA input you need to insert XLR shorting plug!)
POWER OUTPUT: 2 x 450/2 x 800/2 x 1.350W at 8/4/2ohm
(peak power output: 600W at 8ohm)
FREQUENCY RESPONSE: 20 Hz to 20 kHz, +/-0 dB; (DC to 300kHz,-3dB)
DISTORTION: THD 0.03%
IMD 0.03%
TRANSIENT RESPONSE: Rise and Settling time < 450 ns
Slew rate 1.500 V/us (Amplification stages)
SIGNAL TO NOISE RATIO: > 120 dB (unweighted)
POWER SUPPLY: 2pcs of 1.500VA low noise toroidal transformers,
180.000uF custom made capacitors bank
AC VOLTAGE: 115 V or 230 V (nominal line voltage)
AC VOLTAGE RANGE: +/- 10% (from nominal line voltage)
WARRANTY: 5 years, parts and labor
NET DIMENSIONS: 504 x 292 x 521mm (whd); 19.8 x 11.5 x 20.5 inch (whd)
NETWEIGHT: 81kg / 178lbs
PACKAGE DIMENSIONS: 720 x 410 x 738mm (whd); 28.3×16.1×29 inch (whd)
PACKAGEWEIGHT: 103kg/226lbs

POWERb MONO – mono power amplifier
Technical specifications
The following data were consistently measured on random test objects and are typical of the product in question. Nominal operating mains (AC) voltage of all our products is 115V or 230V. If the mains supply voltage drops approximately 10% below its nominal value, the power output of our amplifiers will reduce itself by approximately 15%.
INPUTS: 1 balanced (XLR) and 1 unbalanced (RCA)
INPUT IMPEDANCE: 30 kOhm (balanced/unbalanced)
INPUT SENSITIVITY: 2.0 V/RMS (for max output)
GAIN: + 36dB
XLR PIN LAYOUT: PIN 1-ground, PIN 2-positive signal, PIN 3-negative signal
(when use RCA input you need to insert XLR shorting plug!)
POWER OUTPUT: 1.200/2.100/3.600W at 8/4/2ohm
(peak power output: 1.500W at 8ohm)
FREQUENCY RESPONSE: 20 Hz to 20 kHz, +/-0 dB; (DC to 300kHz,-3dB)
DISTORTION: THD 0.03%
IMD 0.03%
TRANSIENT RESPONSE: Rise and Settling time < 450 ns
Slew rate 1.500 V/us (Amplification stages)
SIGNAL TO NOISE RATIO: > 120 dB (unweighted)
POWER SUPPLY: 2pcs of 2.100VA low noise toroidal transformers,
180.000uF custom made capacitors bank
AC VOLTAGE: 115 V or 230 V (nominal line voltage)
AC VOLTAGE RANGE: +/- 10% (from nominal line voltage)
WARRANTY: 5 years, parts and labor
NET DIMENSIONS: 504 x 292 x 521mm (whd); 19.8 x 11.5 x 20.5 inch (whd)
NETWEIGHT: 81kg / 178lbs (each)
PACKAGE DIMENSIONS: 720 x 410 x 738mm (whd); 28.3×16.1×29 inch (whd)
PACKAGEWEIGHT: 103kg/226lbs (each)

KAI180Mk2
Fully balanced integrated amplifier. 2x180W (8 Ohm) in class A + remote
* Fully balanced topology
* Channel separated power supplies from a 630 VA toroidal power transformer, 80.000 micro Farad filter bank and four stages of stabilization.
* Frequency response DC-300kHZ +0, -3 dB
* Signal to noise ratio better than -112 dB
* Intermodulation distorsion less than 0,03% at rated power into 8 Ohms
* REC OUT may be used for Home Theater bypass
* Total gain is 28 dB ,
* Gain of the preamplifier section is 6 dB
* Pink noise min RMS Power 180/300W into 8/4 Ohms ( not recomended for loads under 3 Ohms )
* Dimensions 500x90x340 mm ( 19,7×3,6×13,4 inch ) WxHxD
* Shipping wooden crate dimensions 640x460x250mm WxDxH
* Net weight 19 kg
* Shipping weight in wooden crate 27 kg

KAS180Mk2
Fully balanced dual mono power amplifier. 2x180W (8 Ohm) in class A
- Channel separated power supplies from a 680 VA toroidal transformer, 80.000 micro Farad filter bank and four stages of stabilisation
- Frequency response DC – 300kHz +0, -3 dB
- Signal to noise ratio better than -112 dB
- Intermodulation distorsion less than 0,03% at rated power into 8 Ohms
- Gain is 28 dB
- Pink noise min RMS Power 180/300W into 8/4 Ohms (not recomended for loads under 3 Ohms)
- Input impedance 30 kilo Ohm
- Dimensions 500x90x340 mm ( 19,7×3,6×13,4 inch ) WxHxD
- Shipping wooden crate dimensions 640x460x250mm WxDxH
- Net weight 18 kg
- Shipping weight in wooden crate 29 kg

KAS400
Fully balanced dual mono power amplifier. 2x400W (8 Ohm) in class A
- Fully balanced topology
- Channel separated power supplies from a two 1200 VA toroidal power transformers
- 132.000 mikroF filter bank and four stages of stabilization
- Frequency response DC-300kHz +0,-3dB
- Signal to Noise ratio better than -112 dB
- Intermodulation distortion less than 0.03% at rated power into 8 Ohms
- Pink noise min RMS Power 420/720 W into 8/4 Ohms
- Dimensions 500x235x450 mm (19,7×9,25×13,4 inch) WxHxD
- Net weight 54 kg
- Input impedance 30 kilo Ohm on RCA as well as XLR inputs
- Gain is 28 dB
- phase is not reversed when using RCA inputs
- Wooden crate shipping dimensions 566x380x636 mm WxHxD , 65 kg

KAS600
Fully balanced dual mono power amplifier. 2x600W (8 Ohm) in class A
- Fully balanced topology
- Channel separated power supplies from a two 1500 VA toroidal power transformer
- 132.000 mikroF filter bank and four stages of stabilization
- Frequency response DC-300kHz +0,-3dB
- Signal to Noise ratio better than -112 dB
- Intermodulation distortion less than 0.03% at rated power into 8 Ohms
- Pink noise min RMS Power 600/1000 W into 8/4 Ohms
- Gain is 28 dB
- Input impedance 30 kilo Ohm
- Idle power consumption 300VA ( 2 x 150VA )
- Front to back feet distance ( center to center ) 450 mm
- Dimensions 500x235x590 mm (19,7×9,25×23,2 inch) WxHxD
- Wooden crate shipping dimensions 640x375x665 mm WxHxD
- Net weight 90 kg
KAM900
Fully balanced mono power amplifier. 2x900W (8 Ohm) in class A
- fully balanced topology
- channel separated power supplies with two 1200 VA toroidal power transformers,
132.000 μF filter bank and four stages of stabilization - frequency response DC-300kHz +0,-3dB
- Gain is 28 dB
- S/N ratio better than -112 dB
- Intermodulation distortion less than 0.03% at rated power into 8 Ohms
- Pink noise min RMS Power 900/1500 W into 8/4 Ohms
- XLR pins layout:
PIN1 GND PIN2 + (hot) PIN3 – (cold)
RCA + (hot) referenced to XLR PIN2 + (hot) - Units total signal polarity is noninverting!
- Dimensions 500x235x450 mm (19,7×3,6×13,4 inch) WxHxD
- Net weight 54 kg

KAM2000
Fully balanced mono power amplifier. 2x2000W (8 Ohm) in class A
- Fully balanced topology
- Channel separated power supplies from a two 1500 VA toroidal power transformer
- 132.000 mikroF filter bank and four stages of stabilization
- Frequency response DC-300kHz +0,-3dB
- Signal to Noise ratio better than -112 dB
- Intermodulation distortion less than 0.03% at rated power into 8 Ohms
- Pink noise min RMS Power 2000/3600 W into 8/4 Ohms
- Input impedance 30 kilo Ohm
- Gain is 28 dB
- Idle power consumption 600VA ( 4 x 150VA )
- Front to back feet distance ( center to center ) 450 mm
- Dimensions 500x235x590 mm (19,7×9,25×23,2 inch) WxHxD
- Wooden crate shipping dimensions 640x375x665 mm WxHxD
- Net weight 90 kg
KA Ph2 Mk3
Fully balanced topology phono preamplifier
- fully balanced topology
- power supply with four levels of stabilization per channel
- 2 toroidal transformers. Each channel has its own transformer
- frequency response DC-300kHz +0,-3dB
- RIAA MM/MC: + – 0.1 dB
- S/N ratio better than: -90dB(phono MM), -81dB(phono MC)
- Output level: 12V Eff / 0,6 Ohms
- Intermodulation distortion less than 0.006%
- Dimensions 500x110x360 mm WxHxD,
- Net weight 9 kg

KAL Mk3
Fully balanced line preamplifier in class A with remote
- Four-gang, balanced ALPS attenuator
- Power supply with four levels of stabilisation per channel
- 3 toroidal transformers, one per audio channel and third for digital and control circuits
- Frequency response DC-300 kHz +0, -3 dB
- Signal to noise ratio better than -118 dB ( line )
- Output level 15 Volts effective at 0,6 Ohms
- Intermodulation distorsion less than 0,006%
- Total gain via XLR input 6dB
- XLR pinout: PIN1 GND PIN2 + (hot) PIN3 – (cold)
- RCA + (hot) referenced to XLR PIN2 + (hot)
- Units total signal polarity is non-inverting!
- Dimensions 500x110x360mm WxHxD
- Net weight 15 kg
- Shipping wooden crate dimensions 636x466x246 mm WxDxH

KAL ReferenceMk3
Fully balanced reference preamplifier in class A with external power supply + remote
- Fully balanced topology
- Four-gang-balanced attenuator with 64 positions, using highest quality vacuum relays and fixed value 0.1% tolerance metal film resistors
- Power supply in separate case, with four levels of stabilization per channel
- 3 toroidal transformers. Each channel has own transformer. Third transformer supply digital and control circuits.
- Frequency response DC-300kHz +0,-3dB
- RIAA MM/MC: + – 0.1 dB
- S/N ratio better than: -118 dB(line), -90dB(phono MM), -81dB(phono MC)
- Output level: 15V Eff / 0,6 Ohms
- Intermodulation distortion less than 0.006%
- Input impedance on both RCA and XLR inputs is 30 kiloOhms
- It is recommended that source output impedance is as low as possible, up to 300 Ohms
- Output impedance unloaded under 9 Ohms, under load 0,6 Ohms, linear at all frequencies, as there are no condensers in signal path.
- Dimensions 500x110x360 mm W x H x D, each case
- Net weight 21 kg
- Shipping dimensions 466x636x246 mm D x W x H , each case
- Shipping weight 44 kg ( each case weigh 22 kgs )
NOTES:
Custom-made, ring type transformers with low inductance are enabling faster energy discharge by means of having triple twisted secondary conductors instead of a single wire.
Power bank condensers are custom made in leading German factory, as per Milan Karan`s own specs. Their extremely fast discharge rate is achieved partially by decreasing capacitors own inductance.
Electronic circuits are fully balanced, wide-band and extremely fast.
Components are capable of processing signals up to 20 MHz, properly handling prime tones and their harmonics as well.
An extremely efficient power consumption is achieved by applying real-time, analogue sliding-bias with 20% more current at the output than strictly needed for any given input signal level, ensuring more than enough power at all times, tough without overheating.
Offset voltages are controlled with DC servo circuits
Karan amplifiers are fully DC coupled, there are no condensers in the signal path, meaning true linearity – without condensers which would act as filters, influencing both frequency and phase responses.
Minimizing phase shift results in perfect positioning, especially in the increased depth and overall resolution of the soundstage, while keeping the natural timbres intact as well.
A short signal path concept results in a short sales path as well.